Visual Intercom Installation Method

1. The installation of the door control machine: The door control machine is best installed in a place that does not receive wind and rain. The selection of the location point should consider the minimum obstacles between the door machine and the indoor machine. If there are obstacles, the signal will be weakened. , Turn on the indoor unit and place it in the place where the user wants to place it indoors, and adjust it according to the signal strength of the indoor unit. The recommended installation height is 1.3-1.8 meters. If the connecting wire is going to cross the wall, you can pack the plug with tape first. Avoid letting you in. It is also possible to fundamentally avoid some failures!

2. Installation of wireless video intercom doorbell

(1) Open the screws at the bottom of the door phone, take out the hanging shell, and fix the hanging shell with rubber plugs and screws.

(2) When choosing power off or power on to connect to the line and power supply, the user must select the power supply according to the power of the electric lock, and set the time according to the parameters of the electric lock. The three components of the wireless doorbell form a wireless system, and each part of the system communicates with each other to realize the functions of voice intercom or visual voice intercom, monitoring, photographing, and so on.